Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications

• Published in: Journal of materials chemistry. C, Materials for optical and electronic devices Materials for optical and electronic devices, 2016-01, Vol.4 (1), p.157-166
• Main Authors: Liu, Hu, Li, Yilong, Dai, Kun, Zheng, Guoqiang, Liu, Chuntai, Shen, Changyu, Yan, Xingru, Guo, Jiang, Guo, Zhanhu
• Format: Article
• Language: English
• Subjects: Fatigue (materials); Graphene; Nanocomposites; Strain; Strain gages; Strain rate; Tunneling; Urethane thermoplastic elastomers
• ISSN: 2050-7526; 2050-7534
• DOI: 10.1039/C5TC02751A

An electrically conductive ultralow percolation threshold of 0.1 wt% graphene was observed in the thermoplastic polyurethane (TPU) nanocomposites. The homogeneously dispersed graphene effectively enhanced the mechanical properties of TPU significantly at a low graphene loading of 0.2 wt%. These nanocomposites were subjected to cyclic loading to investigate the influences of graphene loading, strain amplitude and strain rate on the strain sensing performances. The two dimensional graphene and the flexible TPU matrix were found to endow these nanocomposites with a wide range of strain sensitivity (gauge factor ranging from 0.78 for TPU with 0.6 wt% graphene at the strain rate of 0.1 min −1 to 17.7 for TPU with 0.2 wt% graphene at the strain rate of 0.3 min −1 ) and good sensing stability for different strain patterns. In addition, these nanocomposites demonstrated good recoverability and reproducibility after stabilization by cyclic loading. An analytical model based on tunneling theory was used to simulate the resistance response to strain under different strain rates. The change in the number of conductive pathways and tunneling distance under strain was responsible for the observed resistance-strain behaviors. This study provides guidelines for the fabrication of graphene based polymer strain sensors.