Room-temperature direct band-gap electroluminescence from germanium (111)-fin light-emitting diodes

• Published in: Japanese Journal of Applied Physics 2017-03, Vol.56 (3), p.32102-032102
• Main Authors: Tani, Kazuki, Saito, Shin-ichi, Oda, Katsuya, Miura, Makoto, Wakayama, Yuki, Okumura, Tadashi, Mine, Toshiyuki, Ido, Tatemi
• Format: Article
• Language: English
• Subjects: Electroluminescence; Energy gaps (solid state); Fins; Germanium; Light emitting diodes; Silicon; Silicon germanides; Thermal expansion
• ISSN: 0021-4922; 1347-4065
• DOI: 10.7567/JJAP.56.032102

Germanium (Ge) (111) fins of 320 nm in height were successfully fabricated using a combination of flattening sidewalls of a silicon (Si) fin structure by anisotropic wet etching with tetramethylammonium hydroxide, formation of thin Ge fins by selective Si oxidation in SiGe layers, and enlargement of Ge fins by Ge homogeneous epitaxial growth. The excellent electrical characteristics of Ge(111) fin light-emitting diodes, such as an ideality factor of 1.1 and low dark current density of 7.1 × 10−5 A cm−2 at reverse bias of −2 V, indicate their good crystalline quality. A tensile strain of 0.2% in the Ge fins, which originated from the mismatch of the thermal expansion coefficients between Ge and the covering SiO2 layers, was expected from the room-temperature photoluminescence spectra, and room-temperature electroluminescence corresponding to the direct band-gap transition was observed from the Ge fins.