Effect of residual stress around cold worked holes on fracture under superimposed mechanical load

• Published in: Engineering fracture mechanics 1999-08, Vol.63 (6), p.751-773
• Main Authors: Pavier, M.J., Poussard, C.G.C., Smith, D.J.
• Format: Article
• Language: English
• Subjects: Cold working; Fastener holes; Finite element simulation; Fracture mechanics; Residual stress
• ISSN: 0013-7944; 1873-7315
• DOI: 10.1016/S0013-7944(99)00050-8

Cold working is one method used to enhance the fatigue life of holes in aerospace structures. The method introduces a compressive stress field in the material around the hole and this reduces the tendency for fatigue cracks to initiate and grow under superimposed cyclic mechanical load. To include the benefit of cold working in design the stress intensity factors must be evaluated for cracks growing from the hole edge. Two-dimensional (2D) finite element analyses have been carried out to quantify the residual stresses surrounding the cold worked hole. These residual stresses have been used in a finite element calculation of the effective stress intensity factor for cracks emanating from the hole edge normal to the loading direction. The results of the 2D analysis have been compared with those derived using a weight function method. The weight function results have been shown always to underestimate the stress intensity factor. A three-dimensional (3D) FEA has been carried out using the same technique for stress intensity factor evaluation to investigate the effect of through thickness variation of residual stress. Stress intensity factors calculated with the 3D analysis are generally higher than those calculated using the 2D analysis.