Slagging propensities of blended coals

• Published in: Fuel (Guildford) 2001-07, Vol.80 (9), p.1351-1360
• Main Authors: Su, S, Pohl, J.H, Holcombe, D, Hart, J.A
• Format: Article
• Language: English
• Subjects: Applied sciences; Blended coals; Combustion of solid fuels; Combustion. Flame; Energy; Energy. Thermal use of fuels; Exact sciences and technology; Fe 2O 3/CaO molar ratio; Slagging propensity; Theoretical studies. Data and constants. Metering
• ISSN: 0016-2361; 1873-7153
• DOI: 10.1016/S0016-2361(00)00214-3

This paper presents the experimental results on the slagging propensity of three pairs of blended coals tested in the Australian Coal Industry Research Laboratory furnace. The results showed that none of the coals or blends produced strongly molten deposit. At worst, the deposits contained some moderately sintered material. Most of the blends have (slightly) worse slagging behavior than the component coals. In order to rank the slagging propensity numerically, we defined the minimum heat flux ratio and total heat flux ratio based on the heat flux profiles. They are better in ranking the slagging propensities than other measures such as the build-up rate and visual physical characteristics. The Fe 2O 3/CaO molar ratio correlates the slagging propensity for five coals and six blends of this study. The worst slagging occurs when the ratio approaches 1.0. This ratio provides explanation of why the blends had worse slagging than the component coals for the pairs of blends: A–B and C–D. However, we note that there are causes of slagging other than the Fe 2O 3/CaO molar ratio.