The effect of composition on the microwave bonding of alumina ceramics

The microwave bonding of three alumina ceramics with different compositions has been investigated, without the use of interlayers, using a single-mode resonant cavity operating at 2450 MHz. The temperature and axial pressure were varied and the bonding time was kept to a minimum. For comparison, equ...

Full description

Saved in:
Bibliographic Details
Published in:Journal of materials science 1998, Vol.33 (12), p.3017-3029
Main Authors: BINNER, J. G. P, FERNIE, J. A, WHITAKER, P. A, CROSS, T. E
Format: Article
Language:English
Subjects:
Alumina
Aluminum oxide
Applied sciences
Bend tests
Building materials. Ceramics. Glasses
Ceramic bonding
Ceramic industries
Ceramics
Chemical industry and chemicals
Composition effects
Deformation mechanisms
Dielectric loss
Diffusion rate
Diffusion welding
Exact sciences and technology
Interlayers
Materials science
Migration
Miscellaneous
Technical ceramics
Viscous flow
Citations: Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The microwave bonding of three alumina ceramics with different compositions has been investigated, without the use of interlayers, using a single-mode resonant cavity operating at 2450 MHz. The temperature and axial pressure were varied and the bonding time was kept to a minimum. For comparison, equivalent joins were produced using a standard diffusion bonding technique. Analysis of the resultant bonds indicated that, the lower the purity of the alumina, the more successful is the microwave bonding process. Whilst 99.8% alumina could not be heated to sufficiently high temperatures, the 94% and 85% aluminas could be joined successfully. The results indicated that a major function of the glassy grain-boundary phase was to increase the dielectric loss of the material. For the 85% alumina, bonding times were typically 10 min or less and total processing times were 30–45 min. This was much faster than could be satisfactorily achieved using diffusion bonding and resulted in significantly less deformation of the samples. The operational mechanisms, however, appeared to be almost identical between the two techniques and were based on viscous flow of the glassy grain-boundary phase. Provided that sufficient migration across the bond line of both glassy phase and grains occurred, then a fully homogeneous microstructure was obtained. In such cases, the mechanical strength of the bond could be at least as high as and often higher than that of the parent material, with the joined samples never breaking at the bond line during four-point bend tests. © 1998 Kluwer Academic Publishers
ISSN:0022-2461
1573-4803
DOI:10.1023/A:1004319100692