Process monitoring to assist the workpiece surface quality in machining

The paper reports on research which attempts to correlate the quality of the machined surface after broaching and the output signals obtained from multiple sensors, namely acoustic emission, vibration, and cutting forces. The quality of the machined surface was estimated in terms of geometrical accu...

Full description

Saved in:
Bibliographic Details
Published in:International journal of machine tools & manufacture 2004-08, Vol.44 (10), p.1091-1108
Main Authors: Axinte, Dragoş A, Gindy, Nabil, Fox, Kate, Unanue, Iker
Format: Article
Language:English
Subjects:
Acoustic emission
Broaching
Cutting forces
Surface quality
Vibration
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The paper reports on research which attempts to correlate the quality of the machined surface after broaching and the output signals obtained from multiple sensors, namely acoustic emission, vibration, and cutting forces. The quality of the machined surface was estimated in terms of geometrical accuracy, burr formation, chatter marks and surface anomalies. Cutting conditions were varied based on an orthogonal array with cutting speed, coolant conditions, and tool settings as factors. Each orthogonal array was repeated at three levels of the tool wear. The results show that the cutting force signals are sensitive enough to detect the geometrical deviation of the machined profile, burr formation and to a lesser extent the chatter marks. The vibration signals were found sensitive to detect the chatter marks while the acoustic emission signal proved to be efficient for the detection of small surface anomalies such as pluckings, laps, and smeared material. However, up to now, no clear distinction between the different types of the surface anomalies could be made using the analysis of the acoustic emission signal. Time and frequency domain analysis of the output signals were carried out in order to develop appropriate techniques for qualitative/quantitative evaluation of the machined surface quality. It was found that each sensory signal is rather limited to a narrow field of application where certain surface features are detectable. The limitations of the employed sensory signals/analysis methodologies used to assess the workpiece surface quality, and their applicability in the industrial machining conditions are also discussed.
ISSN:0890-6955
1879-2170
DOI:10.1016/j.ijmachtools.2004.02.020