Electrooptical measurements for monitoring metabolite fluxes in acetone-butanol-ethanol fermentations

• Published in: Biotechnology and bioengineering 2008-03, Vol.99 (4), p.862-869
• Main Authors: Junne, Stefan, Klein, Eva, Angersbach, Alexander, Goetz, Peter
• Format: Article
• Language: English
• Subjects: ABE fermentation; Acetone - metabolism; Anisotropy; Bacteria; Biological and medical sciences; Biotechnology; Butanols - metabolism; cell polarizability; Cells; Clostridium acetobutylicum; Clostridium acetobutylicum - cytology; Clostridium acetobutylicum - metabolism; Electrochemistry; electrooptical measurement; Energy Metabolism - physiology; Ethanol; Ethanol - metabolism; Fermentation; Fundamental and applied biological sciences. Psychology; Measurement techniques; metabolite fluxes; Methods. Procedures. Technologies; Microbial engineering. Fermentation and microbial culture technology; Microscopy, Polarization - methods; process monitoring
• ISSN: 0006-3592; 1097-0290
• DOI: 10.1002/bit.21639

Anisotropy of electrical polarizability in Clostridium acetobutylicum cells during pH 5 controlled acetone butanol ethanol fermentations was observed. Cell length was determined from the electrooptical data. Mean length was determined as being 2.5 μm in the growth phase and 3.5 μm in the early stationary phase. Based on the obtained frequency dispersion of polarizability anisotropy (FDPA) in the range of 190 to 2,100 kHz, the switch from the acidogenic to the solventogenic phase could be monitored. The slope of polarizability versus the frequency made it possible to differentiate between phases of dominating acid and solvent production. Metabolite fluxes determined from concentration measurements correlated well to the polarizability. A partial least-squares (PLS) model was established and validated by applying data from several fermentations. The root mean square error of calibration (RMSEC) was 0.09 for the acid fluxes and 0.11 for the solvent fluxes. The root mean square error of prediction (RMSEP) was 0.20 for acid fluxes and 0.24 for solvent fluxes. The ratio of polarizability at high and low frequencies correlated to the ongoing sporulation process. At ratios below 0.25, spore formation in the cells became visible under the microscope. The advantage of using electrooptical measurements is the ability to observe metabolite fluxes rather than concentrations, which provides useful information on productivity during a bioprocess. Biotechnol. Bioeng. 2008;99: 862-869. © 2007 Wiley Periodicals, Inc.