Application of ion-exchange separations to determination of trace elements in natural waters—IX: Simultaneous isolation and determination of uranium and thorium

• Published in: Talanta (Oxford) 1976-04, Vol.23 (4), p.295-300
• Main Authors: Korkisch, J., Krivanec, H.
• Format: Article
• Language: English
• ISSN: 0039-9140; 1873-3573
• DOI: 10.1016/0039-9140(76)80196-8

A method is described for the determination of uranium and thorium in samples of natural waters. After acidification with citric acid the water sample is filtered and sodium citrate and ascorbic acid are added. The resulting solution of pH 3 is passed through a 4-g column of Dowex 1 × 8 (citrate form) on which both uranium and thorium are adsorbed as anionic citrate complexes. Thorium is eluted with 8 M hydrochloric acid and separated from co-eluted substances by anion-exchange in 8 M nitric acid medium on a separate 2-g column of the same resin in the nitrate form. After complete removal of iron by washing with a mixture consisting of IBMK, acetone and 1 M hydrochloric acid (1:8:1 v v ) and treatment of the resin with 6 M hydrochloric acid, the uranium is eluted from the 4-g column with 1 M hydrochloric acid. In the eluate thorium is determined spectrophotometrically (arsenazo III method) while fluorimetry is employed for the assay of uranium. The procedure was used for the determination of uranium and thorium in numerous water samples collected in Austria, including samples of mineral-waters. The results indicate that a simple relationship exists between the uranium and thorium contents of waters which makes it possible to calculate the approximate thorium content of a sample on the basis of its uranium concentration and vice versa.