Characterization of Surface-Treated Polyethylene for Water-Based Ink Printability

• Published in: Journal of plastic film & sheeting 1990-01, Vol.6 (1), p.17-30
• Main Authors: Ealer, George E., Harris, William C., Samuels, Sari B.
• Format: Article
• Language: English
• Subjects: Applied sciences; Coating, metallization, dyeing; Exact sciences and technology; Machinery and processing; Plastics; Polymer industry, paints, wood; Technology of polymers
• ISSN: 8756-0879; 1530-8014
• DOI: 10.1177/875608799000600104

With increasingly stringent EPA guidelines for controlling emissions of volatile organic compounds on the horizon, the desirability to move to water-based printing inks is evident This paper examines the effects of corona discharge treat ments which are commonly used to improve ink adhesion to polvethylene. Electron spectroscopy for chemical analysis (ESCA) was used to determine the surface chemi cal changes induced by corona treatments in pure polyethylene extruded films and in formulated resin systems This data was correlated with surface tension and ink adhesion measurements to show the effects of treatment and additives on the final printability of the films with particular emphasis on water-based inks. In addition, the effects of stonng treated film prior to printing and of retreating these films were also examined The results of these tests have shown that formulated linear low den sity polyethylene (LLDPE) films treat and print at least as easily as high-pressure low-density polyethylene (HP-LDPE) counterparts.