Overview of steam generator tube degradation and integrity issues

• Published in: Nuclear engineering and design 1999-11, Vol.194 (1), p.19-30
• Main Authors: Diercks, D.R., Shack, W.J., Muscara, J.
• Format: Article
• Language: English
• Subjects: Degradation; Inspection; Laws and legislation; Nuclear materials safeguards; Steam generators; Stress corrosion cracking; Superheater tubes
• ISSN: 0029-5493; 1872-759X
• DOI: 10.1016/S0029-5493(99)00167-3

The degradation of steam generator tubes in pressurized water nuclear reactors, and, in particular, the stress corrosion cracking (SCC) of Alloy 600 tubes, continues to be a serious problem. Primary water SCC is commonly observed at the roll transition zone (RTZ), at U-bends and tube denting locations, and occasionally in plugs and sleeves. Outer-diameter SCC (ODSCC) and intergranular attack (IGA) commonly occur near tube support plate (TSP) crevices, near the tube sheet in crevices, or under sludge piles, and occasionally in the free span. A particularly troubling recent trend has been the increasing occurrence of axial and circumferential cracking at the RTZ on both the primary and secondary sides. Outer-diameter stress corrosion cracking in TSP crevices, commonly consisting of segmented axial cracks with interspersed uncracked ligaments, is also becoming more common. Despite recent advances in inservice inspection (ISI) technology, a clear need still exists for quantifying and improving the reliability of ISI methods with respect to the probability of detection of the various types of flaws and their accurate sizing. These improvements are necessary to permit an accurate assessment of the consequences of leaving degraded tubes in service over the next reactor operating cycle. Degradation modes such as circumferential cracking, intergranular attack, and ODSCC at the TSP have affected a large number of tubes. New regulatory guidance is being developed that requires the development and implementation of a steam generator management program that monitors tube condition against accepted performance criteria to ensure that the tubes will perform the required safety function over the next operating cycle. In formulating new guidance for the implementation of alternate repair criteria, the U.S. Nuclear Regulatory Commission is also evaluating the contribution to overall plant risk from severe accidents. Preliminary analyses are being performed for a postulated severe-accident scenario that involves station blackout and loss of primary feedwater, in order to determine the probability of failure for degraded tubes.