Electrical Power from Sea and River Water by Reverse Electrodialysis: A First Step from the Laboratory to a Real Power Plant

• Published in: Environmental science & technology 2010-12, Vol.44 (23), p.9207-9212
• Main Authors: Veerman, Joost, Saakes, Michel, Metz, Sybrand J, Harmsen, G. Jan
• Format: Article
• Language: English
• Subjects: Applied sciences; Comparative analysis; Dialysis; Electricity; Electricity generation; Electrodes; Energy; Energy and the Environment; Energy of waters: ocean thermal energy, wave and tidal energy, etc; Energy-Generating Resources; Exact sciences and technology; Fluid mechanics; Hydrodynamics; Hydroelectric plants; Laboratories; Natural energy; Power Plants; Rivers - chemistry; Saline water; Salinity; Seawater - chemistry; Studies
• ISSN: 0013-936X; 1520-5851
• DOI: 10.1021/es1009345

Electricity can be produced directly with reverse electrodialysis (RED) from the reversible mixing of two solutions of different salinity, for example, sea and river water. The literature published so far on RED was based on experiments with relatively small stacks with cell dimensions less than 10 × 10 cm2. For the implementation of the RED technique, it is necessary to know the challenges associated with a larger system. In the present study we show the performance of a scaled-up RED stack, equipped with 50 cells, each measuring 25 × 75 cm2. A single cell consists of an AEM (anion exchange membrane) and a CEM (cation exchange membrane) and therefore, the total active membrane area in the stack is 18.75 m2. This is the largest dimension of a reverse electrodialysis stack published so far. By comparing the performance of this stack with a small stack (10 × 10 cm2, 50 cells) it was found that the key performance parameter to maximal power density is the hydrodynamic design of the stack. The power densities of the different stacks depend on the residence time of the fluids in the stack. For the large stack this was negatively affected by the increased hydrodynamic losses due to the longer flow path. It was also found that the large stack generated more power when the sea and river water were flowing in co-current operation. Co-current flow has other advantages, the local pressure differences between sea and river water compartments are low, hence preventing leakage around the internal manifolds and through pinholes in the membranes. Low pressure differences also enable the use of very thin membranes (with low electrical resistance) as well as very open spacers (with low hydrodynamic losses) in the future. Moreover, we showed that the use of segmented electrodes increase the power output by 11%.