Xenon transient simulation of the VVER-1000 nuclear reactor using adiabatic approximation

The neutronic behavior of very slow transients like fuel burn up and xenon studies can be performed with the sequence of instantaneous criticality calculations. Such a scheme is known as the adiabatic approximation. 135Xe as a fission product has an enormous thermal absorption cross section, on the...

Full description

Saved in:
Bibliographic Details
Published in:Annals of nuclear energy 2010-05, Vol.37 (5), p.753-761
Main Authors: Kheradmand Saadi, M., Shahriari, M., Zolfaghari, A.R.
Format: Article
Language:English
Subjects:
Adiabatic flow
Flux
Mathematical analysis
Nuclear engineering
Nuclear power generation
Nuclear reactors
Power distribution
Xenon
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The neutronic behavior of very slow transients like fuel burn up and xenon studies can be performed with the sequence of instantaneous criticality calculations. Such a scheme is known as the adiabatic approximation. 135Xe as a fission product has an enormous thermal absorption cross section, on the order of a million barns, therefore the study of xenon poisoning and its effect on flux and power distribution is very important in thermal reactors. In this work xenon transient analysis of the VVER-1000 nuclear reactor and its effect on the flux and power distribution from reactor start up to xenon saturation and the change of power from nominal to 25% of nominal is carried out using WIMS and CITATION codes. We used the WIMS cell calculation code and found some relations between xenon concentration and group constants of different FA (Fuel Assemblies); in this way we bypassed the WIMS running at each time step. Also, the CITATION code is used as a core calculation code to find the effective multiplication factor as well as flux and power distributions. In order to link WIMS and CITATION codes and facilitate numerous executions, a VISUAL BASIC program has been developed. The results have a good agreement with the safety analysis report of the reference plant such that the relative differences in most cases are less than 10%.
ISSN:0306-4549
1873-2100
DOI:10.1016/j.anucene.2010.01.005