Structural Ordering in SWCNT-Polyimide Nanocomposites and Its Influence on Their Mechanical Properties

Using fully-atomistic models, tens-microseconds-long molecular-dynamic modelling was carried out for the first time to simulate the kinetics of polyimides ordering induced by the presence of single-walled carbon nanotube (SWCNT) nanofillers. Three polyimides (PI) were considered with different dianh...

Full description

Saved in:
Bibliographic Details
Published in:Polymers 2018-11, Vol.10 (11), p.1245
Main Authors: Larin, Sergey V, Nazarychev, Victor M, Dobrovskiy, Alexey Yu, Lyulin, Alexey V, Lyulin, Sergey V
Format: Article
Language:English
Subjects:
Benzene
Carbon
Crystallization
Diamines
Dianhydrides
Dynamic models
Elongation
Graphene
Hydrocarbons
Investigations
Mechanical properties
Melting points
Molecular dynamics
Nanocomposites
Polyethylene
Polyimide resins
Polymer melts
Polymers
Simulation
Single wall carbon nanotubes
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Using fully-atomistic models, tens-microseconds-long molecular-dynamic modelling was carried out for the first time to simulate the kinetics of polyimides ordering induced by the presence of single-walled carbon nanotube (SWCNT) nanofillers. Three polyimides (PI) were considered with different dianhydride fragments, namely 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA), 2,3',3,4'-biphenyltetracarboxylic dianhydride (aBPDA), and 3,3',4,4'-oxidiphthalic dianhydride (ODPA) and same diamine 1,4-bis[4-(4-aminophenoxy)phenoxy]benzene (diamine P3). Both crystallizable PI BPDA-P3 and two amorphous polyimides ODPA-P3 and aBPDA-P3 reinforced by SWCNTs were studied. The structural properties of the nanocomposites at temperature close to the bulk polymer melting point were studied. The mechanical properties were determined for the nanocomposites cooled down to the glassy state. It was found that the SWCNT nanofiller initiates' structural ordering not only in the crystallizable BPDA-P3 but also in the amorphous ODPA-P3 samples were in agreement with previously obtained experimental results. Two stages of the structural ordering were detected in the presence of SWCNTs, namely the orientation of the planar moieties followed by the elongation of whole polymer chains. The first type of local ordering was observed on the microsecond time scale and did not lead to the change of the mechanical properties of a polymer binder in considered nanocomposites. At the end of the second stage, both BPDA-P3 and ODPA-P3 PI chains extended completely along the SWCNT surface, which in turn led to enhanced mechanical characteristics in their glassy state.
ISSN:2073-4360
2073-4360
DOI:10.3390/polym10111245