Hollow ZnO nanorices prepared by a simple hydrothermal method for NO and SO gas sensors

• Published in: RSC advances 2021-10, Vol.11 (53), p.33613-33625
• Main Authors: Minh, Luu Hoang, Thuy Thu, Pham Thi, Thanh, Bui Quang, Hanh, Nguyen Thi, Thu Hanh, Do Thi, Van Toan, Nguyen, Hung, Chu Manh, Van Duy, Nguyen, Van Tong, Pham, Hoa, Nguyen Duc
• Format: Article
• ISSN: 2046-2069
• DOI: 10.1039/d1ra05912b

Chemoresistive gas sensors play an important role in detecting toxic gases for air pollution monitoring. However, the demand for suitable nanostructures that could process high sensing performance remains high. In this study, hollow ZnO nanorices were synthesized by a simple hydrothermal method to detect NO 2 and SO 2 toxic gases efficiently. Material characterization by some advanced techniques, such as scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy, demonstrated that the hollow ZnO nanorices had a length and diameter size of less than 500 and 160 nm, respectively. In addition, they had a thin shell thickness of less than 30 nm, formed by an assembly of tiny nanoparticles. The sensor based on the hollow ZnO nanorices could detect low concentration of NO 2 and SO 2 gasses at sub-ppm level. At an optimum operating temperature of 200 °C, the sensor had response values of approximately 15.3 and 4.8 for 1 ppm NO 2 and 1 ppm SO 2 , respectively. The sensor also exhibited good stability and selectivity, suggesting that the sensor can be applied to NO 2 and SO 2 toxic gas detection in ambient air. Hollow ZnO nanorices with an ultrathin shell show excellent response to NO 2 and SO 2 gases.