Understanding inherent substrate selectivity during atomic layer deposition: Effect of surface preparation, hydroxyl density, and metal oxide composition on nucleation mechanisms during tungsten ALD

• Published in: The Journal of chemical physics 2017-02, Vol.146 (5), p.052811-052811
• Main Authors: Lemaire, Paul C., King, Mariah, Parsons, Gregory N.
• Format: Article
• Language: English
• Subjects: Aluminum oxide; Atomic layer epitaxy; Delay; Exposure; Fluorides; Metal fluorides; Nucleation; Selectivity; Semiconductor devices; Silicon dioxide; Substrates; Surface preparation; Thin films; Titanium dioxide; Tungsten
• ISSN: 0021-9606; 1089-7690
• DOI: 10.1063/1.4967811

Area-selective thin film deposition is expected to be important for advanced sub-10 nanometer semiconductor devices, enabling feature patterning, alignment to underlying structures, and edge definition. Several atomic layer deposition (ALD) processes show inherent propensity for substrate-dependent nucleation. This includes tungsten ALD (W-ALD) which is more energetically favorable on Si than on SiO2. However, the selectivity is often lost after several ALD cycles. We investigated the causes of tungsten nucleation on SiO2 and other “non-growth” surfaces during the WF6/SiH4 W-ALD process to determine how to expand the “selectivity window.” We propose that hydroxyls, generated during the piranha clean, act as nucleation sites for non-selective deposition and show that by excluding the piranha clean or heating the samples, following the piranha clean, extends the tungsten selectivity window. We also assessed how the W-ALD precursors interact with different oxide substrates though individual WF6 and SiH4 pre-exposures prior to W-ALD deposition. We conclude that repeated SiH4 pre-exposures reduce the tungsten nucleation delay, which is attributed to SiH4 adsorption on hydroxyl sites. In addition, oxide surfaces were repeatedly exposed to WF6, which appears to form metal fluoride species. We attribute the different tungsten nucleation delay on Al2O3 and TiO2 to the formation of nonvolatile and volatile metal fluoride species, respectively. Through this study, we have increased the understanding of ALD nucleation and substrate selectivity, which are pivotal to improving the selectivity window for W-ALD and other ALD processes.