An approach to utilize the artificial high power LED UV-A radiation in photoreactors for the degradation of methylene blue

• Published in: Photochemical & photobiological sciences 2017-01, Vol.16 (1), p.79-85
• Main Authors: Betancourt-Buitrago, L. A, Vásquez, C, Veitia, L, Ossa-Echeverry, O, Rodriguez-Vallejo, J, Barraza-Burgos, J, Marriaga-Cabrales, N, Machuca-Martínez, F
• Format: Article
• Language: English
• Subjects: Biochemistry; Biomaterials; Chemistry; Hydrogen Peroxide; Light; Methylene Blue - chemistry; Oxidation-Reduction; Photolysis - radiation effects; Physical Chemistry; Plant Sciences; Titanium - chemistry; Ultraviolet Rays
• ISSN: 1474-905X; 1474-9092
• DOI: 10.1039/c6pp00230g

Utilization of UV LED light is trending in the development of photoreactors for pollutant treatment. In this study, two different geometries were studied in the degradation of methylenebBlue (MB) using high power UVA LED as a source of light. The dosage, initial concentration, electric power, and H 2 O 2 addition were evaluated in the two geometries: a mini CPC (Cilindrical Parabolic Collector) and a vertical cylindrical with external irradiation both coupled with LED UVA. Best degradation was obtained for 0.3 g L −1 TiO 2 , 40 min, and 15 ppm of MB of initial concentration in the standard batch reactor. It was found that the best system was a cpc geometry. Also, hydrogen peroxide was used as an electron acceptor and 97% degradation was obtained in 30 min with 10 mM H 2 O 2 and 0.4 g TiO 2 /L. Power of the LEDs was also evaluated and it was found that 20 W m −2 is the best operational condition to achieve the best MB degradation avoiding the oxidant species recombination. Two laboratory photoreactors were compared in the degradation of MB using high power UV LED and resulted in more than 98% degradation.